أخبار العالمتقنية

تحديث معلومات التسجيل الخاصة بال K8s ..

k8s.gcr.io Redirect to registry.k8s.io - What You Need to Know

Authors: Bob Killen (Google), Davanum Srinivas (AWS), Chris Short (AWS), Frederico Muñoz (SAS Institute), Tim Bannister (The Scale Factory), Ricky Sadowski (AWS), Grace Nguyen (Expo), Mahamed Ali (Rackspace Technology), Mars Toktonaliev (independent), Laura Santamaria (Dell), Kat Cosgrove (Dell)

On Monday, March 20th, the k8s.gcr.io registry will be redirected to the community owned registry, registry.k8s.io .

TL;DR: What you need to know about this change

  • On Monday, March 20th, traffic from the older k8s.gcr.io registry will be redirected to registry.k8s.io with the eventual goal of sunsetting k8s.gcr.io.
  • If you run in a restricted environment, and apply strict domain name or IP address access policies limited to k8s.gcr.io, the image pulls will not function after k8s.gcr.io starts redirecting to the new registry. 
  • A small subset of non-standard clients do not handle HTTP redirects by image registries, and will need to be pointed directly at registry.k8s.io.
  • The redirect is a stopgap to assist users in making the switch. The deprecated k8s.gcr.io registry will be phased out at some point. Please update your manifests as soon as possible to point to registry.k8s.io.
  • If you host your own image registry, you can copy images you need there as well to reduce traffic to community owned registries.

If you think you may be impacted, or would like to know more about this change, please keep reading.

How can I check if I am impacted?

To test connectivity to registry.k8s.io and being able to pull images from there, here is a sample command that can be executed in the namespace of your choosing:

kubectl run hello-world -ti --rm --image=registry.k8s.io/busybox:latest --restart=Never -- date

When you run the command above, here’s what to expect when things work correctly:

$ kubectl run hello-world -ti --rm --image=registry.k8s.io/busybox:latest --restart=Never -- date
Fri Feb 31 07:07:07 UTC 2023
pod "hello-world" deleted

What kind of errors will I see if I’m impacted?

Errors may depend on what kind of container runtime you are using, and what endpoint you are routed to, but it should present such as ErrImagePull, ImagePullBackOff, or a container failing to be created with the warning FailedCreatePodSandBox.

Below is an example error message showing a proxied deployment failing to pull due to an unknown certificate:

FailedCreatePodSandBox: Failed to create pod sandbox: rpc error: code = Unknown desc = Error response from daemon: Head “https://us-west1-docker.pkg.dev/v2/k8s-artifacts-prod/images/pause/manifests/3.8”: x509: certificate signed by unknown authority

What images will be impacted?

ALL images on k8s.gcr.io will be impacted by this change. k8s.gcr.io hosts many images beyond Kubernetes releases. A large number of Kubernetes subprojects host their images there as well. Some examples include the dns/k8s-dns-node-cache, ingress-nginx/controller, and node-problem-detector/node-problem-detector images.

I am impacted. What should I do?

For impacted users that run in a restricted environment, the best option is to copy over the required images to a private registry or configure a pull-through cache in their registry.

There are several tools to copy images between registries; crane is one of those tools, and images can be copied to a private registry by using crane copy SRC DST. There are also vendor-specific tools, like e.g. Google’s gcrane, that perform a similar function but are streamlined for their platform.

How can I find which images are using the legacy registry, and fix them?

Option 1: See the one line kubectl command in our earlier blog post:

kubectl get pods --all-namespaces -o jsonpath="{.items[*].spec.containers[*].image}" |\
tr -s '[[:space:]]' '\n' |\
sort |\
uniq -c

Option 2: A kubectl krew plugin has been developed called community-images, that will scan and report any images using the k8s.gcr.io endpoint.

If you have krew installed, you can install it with:

kubectl krew install community-images

and generate a report with:

kubectl community-images

For alternate methods of install and example output, check out the repo: kubernetes-sigs/community-images.

Option 3: If you do not have access to a cluster directly, or manage many clusters – the best way is to run a search over your manifests and charts for “k8s.gcr.io”.

Option 4: If you wish to prevent k8s.gcr.io based images from running in your cluster, example policies for Gatekeeper and Kyverno are available in the AWS EKS Best Practices repository that will block them from being pulled. You can use these third-party policies with any Kubernetes cluster.

Option 5: As a LAST possible option, you can use a Mutating Admission Webhook to change the image address dynamically. This should only be considered a stopgap till your manifests have been updated. You can find a (third party) Mutating Webhook and Kyverno policy in k8s-gcr-quickfix.

Why did Kubernetes change to a different image registry?

k8s.gcr.io is hosted on a custom Google Container Registry (GCR) domain that was set up solely for the Kubernetes project. This has worked well since the inception of the project, and we thank Google for providing these resources, but today, there are other cloud providers and vendors that would like to host images to provide a better experience for the people on their platforms. In addition to Google’s renewed commitment to donate $3 million to support the project’s infrastructure last year, Amazon Web Services announced a matching donation during their Kubecon NA 2022 keynote in Detroit. This will provide a better experience for users (closer servers = faster downloads) and will reduce the egress bandwidth and costs from GCR at the same time.

For more details on this change, check out registry.k8s.io: faster, cheaper and Generally Available (GA).

Why is a redirect being put in place?

The project switched to registry.k8s.io last year with the 1.25 release; however, most of the image pull traffic is still directed at the old endpoint k8s.gcr.io. This has not been sustainable for us as a project, as it is not utilizing the resources that have been donated to the project from other providers, and we are in the danger of running out of funds due to the cost of serving this traffic.

A redirect will enable the project to take advantage of these new resources, significantly reducing our egress bandwidth costs. We only expect this change to impact a small subset of users running in restricted environments or using very old clients that do not respect redirects properly.

What will happen to k8s.gcr.io?

Separate from the the redirect, k8s.gcr.io will be frozen and will not be updated with new images after April 3rd, 2023. k8s.gcr.io will not get any new releases, patches, or security updates. It will continue to remain available to help people migrate, but it WILL be phased out entirely in the future.

I still have questions, where should I go?

For more information on registry.k8s.io and why it was developed, see registry.k8s.io: faster, cheaper and Generally Available.

If you would like to know more about the image freeze and the last images that will be available there, see the blog post: k8s.gcr.io Image Registry Will Be Frozen From the 3rd of April 2023.

Information on the architecture of registry.k8s.io and its request handling decision tree can be found in the kubernetes/registry.k8s.io repo.

If you believe you have encountered a bug with the new registry or the redirect, please open an issue in the kubernetes/registry.k8s.io repo. Please check if there is an issue already open similar to what you are seeing before you create a new issue.

اترك تعليقاً

لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *

شاهد أيضاً
إغلاق
زر الذهاب إلى الأعلى